Plastic Injection Moulding PlantPioneers in the industry, we offer plastic injection moulding machine and moulding plant relocation and set - up from India.
Plastic Injection Moulding Machine
Product Price :Get Latest Price
|Minimum Order Quantity||1 Unit|
|Clamping Force||100-300 ton|
|Plastic Type||PA, PET, ABS, All Engineering Plastic, PE, PP|
|Capacity (Kilogram/Hour)||54 / 87 / 123 kgs/hr.|
|Oil tank capacity (Litre)||210 Litres|
|Warranty (month)||Standard 12 month|
|Clamping Force (Ton)||125 Tons|
|Machine Weight (Ton)||4 Tons|
|Number Of Phases||3 Phase|
|Power (kw)||27.2 kW|
|Pump Driving Motor (hp)||18.2 kW|
|Raw Material||HDPE, PE, PP, PS, PMMA, All Engineering Plastics|
|Voltage (V)||415 V|
|Number Of Tie Bars||4|
|Opening Stroke (mm)||395 mm|
|Place Of Origin||Ahmedabad|
|Cooling Water Consumption (L per min)||65 LPM|
|Screw Stroke||198 mm|
|Screw Diameter||40 , 45, 50 mm|
|Locating Ring Diameter||75 mm|
|Servo Motor||11 Kw|
|Ejector Stroke||150 mm|
|Ejector Force||45 Kn|
|Total Connected Load||18.8 Kw|
|Injection Capacity||231, 305, 377 gms|
|Machine Dimension||4.76 x 1.2 x 1.7 m|
|Water Requirement||85 LPM|
|Plasticizing Rate||15, 24, 34 g/s|
|Injection Pressure||1668 , 1333, 1080 bar|
|Injection Rate||106, 134, 165 cm/s|
|Clamp Stroke||395 mm|
|Screw Speed||240 rpm|
|Total Heating Capacity||9 kw|
|Maximum Day Light||845 mm|
|Minimum Mold Height||180 mm|
|Tie Bar Distance||430 x 430 mm|
- We are offering with high Energy Saving design with branded KEB - Bharat Bijlee Servo Motor and Voith make Sevo Pump.
- This design will save up 25~ 35 % power consumption with ref to product molded in other conventional molding machine.
- Energy / KWH Meter affixed as Standard Feature.
- Energy – KW H also shall be displayed on KEBA (PLC Screen).
- Clamping – Toggle are with Automatic Grease Lubricating Unit.
- T” Slot Platens, to save mould change time and long life of machine, no re-tapping.
- Inter Mot” Redial Piston – Hydro Motor. For Plasticizing.
- KEBA PLC with Color Screen, with best Human interface, Easy to operate by Supervisors.
- Branded Hydraulic Valves.
- Best Quality Bi- Metallic Screw & Barrel for long life and weight consistency under higher injection speed are affixed as Standard Features.
- Branded Linear & Pressure Transducers of Geffran Make.
- Hydraulic Blocks are made in house to get best control.
- Level Pads, Water Manifolds, Clamps & "T" Nuts for Mold Loading & Tool Kit shall be supplied along with Machine.
- Air Valve for Ejection – 2 Circuits are affixed as Standard Feature.
- EURO-MAP compliance. European Safety Standards. As Electrical & Hydraulic Safety for Mold closing with Three Inter locks (Electo.– Mech. Safety).
- We provide replace able Return Line Oil Filter for System Oil Cleaning.
- We also provide SS Hopper & Hopper Magnet as Standard Feature.
- 2 Nos of Core Pull a Fix as a standard feature.
Moulding Plant Relocation and Set - Up
Approx. Price: Rs 1 / UnitGet Latest Price
To furnish the various provisions of our respected clients, we are betrothed in presenting an exceptional quality of Injection Moulding Plant Re-Location and Set-Up, which is extensively utilized.
- High quality of workman ship.
- Easy to maintain
- Minimum Order Quantity: 1 Unit